Aux In Configuration
The AUX system parameter determines whether or not the audio signal from the
Aux In jack will be sent to the outputs. The selectable options are:
• Mute
Selecting this option will mute the Aux In so that you will not hear it in the
output signal.
• Mix
Selecting this option will mix the Aux In signal with the processed vocal signal
at the Live FX's output stage.
To edit the AUX setting:
1.
Press the <System> button.
2.
Press the <DATA> encoder two times to navigate to page 3 within the
System Edit menu.
3.
Turn the <Edit 3> knob to select the desired setting.
4.
Press the flashing <System> button to exit the System Edit menu.
NOTE: Whenever the Aux In jack is connected to an audio source, it will be used
for Live Adapt features instead of the internal microphone.
36
Owner's Manual