Olympus CAMEDIA C-8080 Wide Zoom Reference Manual page 67

External flash (optional)
2
Press e while holding down #.
3
Press ac to select Q FLASH, then
press d.
g"Menu basics" (P.38)
To use the external flash only
→ Select Q, then press e.
To use the external flash together with the built-in flash, use Olumpus flash
bracket and the bracket cable (both optional).
→ Select IN+Q, then press e.
4
Turn on the external flash.
• Set the mode dial to TTL-AUTO.
4
• Be sure to attach the flash to the camera before turning the flash on.
5
Select the flash mode by turning the control dial while holding
down #.
g"Flash shooting" (P.59)
• If close-up pictures are overexposed, try using the built-in flash by itself.
• When the built-in flash and the external flash are used together, the built-in
Note
flash is used as the compensating light source. This means that if the
amount of light from the external flash is insufficient (beyond its working
range), the resulting pictures may be underexposed.
66
FLASH MODE
w
IN+
FLASH
SLOW
SLAVE
SELECt GO