Olympus CAMEDIA C-8080 Wide Zoom Reference Manual page 207

Olympus digital camera basic manual
Hide thumbs Also See for CAMEDIA C-8080 Wide Zoom:
Table of Contents

Advertisement

Troubleshooting
Possible cause
Halation produces unnatural colors in the picture.
This may be caused
by excessively bright
ultraviolet light on the
subject, such as
sunlight shining
through the leaves of
trees, window frames
in bright light at night,
reflection of metal in
direct sunlight, etc.
Pictures you have taken do not appear on the monitor.
The power is off.
The camera is in the
shooting mode.
There are no pictures
on the card.
There is a problem
with the card.
The camera is
connected to a TV.
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
No picture is displayed on the TV when connected to the camera.
The video output
signal is incorrect.
The TV video signal
setting is incorrect.
The viewfinder or monitor is hard to see.
The brightness of the
viewfinder or monitor
is not adjusted
properly.
The monitor is
exposed to direct
sunlight.
Illustrations and explanations are not displayed in English.
A language other than
English has been
selected for on-
screen display.
206
Corrective action
• Use a UV filter. As this may upset the overall
color balance, it should only be used in the
conditions described on the left.
• Process the picture using a graphics application
(Photoshop, Paint Shop Pro, etc.). For example,
after picking up unnatural colors with a syringe
tool, etc. you can select color areas, and try color
conversion or saturation adjustment. For details,
refer to the manual for the graphics application
you are using.
Set the mode dial to q before pressing the power
switch to turn the camera on.
Press the QUICK VIEW button or set the mode dial
to q.
NO PICTURE appears on the monitor. Record
pictures.
Refer to "Error codes".
The monitor does not function when the AV cable
is connected to the camera.
Display pictures with 9 and press 0 button to
cancel protection.
Set the video output signal according to the region
where used.
Set the TV to the video input mode.
Select s in the SETUP tab and adjust the
brightness.
Position the monitor in the down position or block
the sunlight with your hand.
Select English for on-screen display.
Ref. page
P.121
P.121, 122
P.200
P.134
P.142
P.174
P.134
P.173
P.167

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8080 - camedia c wide zoom digital camera

Table of Contents