(Connection to a PC or Printer
Possible cause
The camera is not recognized by the PC.
The USB driver is not
installed.
The camera has not
been turned on.
The printer is selected
as the connection
destination.
The camera cannot be connected to the printer.
PC is selected as the
connection
destination.
The camera or printer
has not been turned
on.
The printer does not
support PictBridge.
Corrective action
It is necessary to install the USB driver for Windows
98/98SE. For installation instructions, see
"OPERATION MANUAL" (Digital camera – PC
connection) on the CD-ROM.
Press the power switch to turn the camera on.
Set the USB option in the SETUP tab to PC.
Set the USB option in the SETUP tab to <.
Turn the camera or printer on.
Refer to the printer's instruction manual or contact
the manufacturer.
Troubleshooting
Ref. page
—
P.25
P.175
P.175
P.187
—
207