Table of Contents
Advertisement
Trimming
To trim a picture by [MORE] in [PRINT] or [MULTI PRINT] mode, follow the
procedure below.
1
Use the arrow pad and zoom
lever to select the trimming
position and size.
• Press acbd to move the trimming
frame.
• Move the zoom lever toward W or T to
select the trimming size from small
horizontal frame, large horizontal frame,
small vertical frame, and large vertical
frame.
• If trimming has already been performed,
the [P] screen appears. Select
[RESET] and press e.
2
Press e.
3
Select [OK] and press e.
OK
Saves the current trimming
size.
RESET
Sets a new trimming size.
→ Repeat the procedure from
CANCEL
Cancels the current trimming
setting.
• Press e to complete trimming and return to the [PRINT INFO] screen.
Note
• The size of the printed picture varies depending on the printer settings. If the
trimmed picture is small, printing magnification increases accordingly, resulting
in a printed picture with lower resolution.
• For the best results with enlarged prints, you are recommended to use the
[TIFF], [SHQ] or [HQ] mode.
Step 1.
Direct printing (PictBridge)
Zoom lever
GO
GO
GO
OK
RESET
CANCEL
SELECT
SELECT
SELECT
GO
GO
GO
OK
OK
OK
8
OK
OK
OK
129
Advertisement
Table of Contents
Troubleshooting
