Screen setup
You can register your favorite picture for display when the power is turned
on and off. Register a picture from the pictures saved on the card and use
[PW ON SETUP] and [PW OFF SETUP] to display it on the startup/
shutdown screen. g"Power on/Power off setup" (P.105)
Mode dial
Top menu
[MODE MENU]
[PW OFF]
• If a picture is already registered, the [IMAGE
EXISTING] screen is displayed asking if you
want to cancel the currently registered picture
and register a new one. To register a new
picture, select [RESET] and press e. If you
select [KEEP], the screen returns to the menu.
1
Select the picture you want to register and press e.
2
Select [OK] and press e.
• The picture is registered and the screen
returns to the menu.
Note
• You cannot register a picture or movie frame that cannot be played back on this
camera.
[SETUP]
[SCREEN SETUP]
[PW ON] /
g"Menus" (P.17)
SCREEN SETUP
IMAGE EXISTING
RESET
KEEP
CANCEL
SELECT
GO
SCREEN SETUP
SET AS PW ON SCREEN
OK
CANCEL
CANCEL
SELECT
GO
Registering a picture for
the [PW ON] screen
OK
7
OK
107