Measurement Units (M/Ft) - Olympus CAMEDIA C-70 ZOOM Advanced Manual

Measurement units (m/ft)

2
Press ac to set the year, then
press d to move to the month
setting.
• To move back to the previous setting,
press b.
• The first two digits of the year are fixed.
3
Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour
format. Consequently, 2 p.m. is displayed as 14:00.
4
Press e.
• For a more accurate setting, press e when the time signal hits 00 seconds.
Note
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 3 days. The settings will be
canceled more quickly if the battery was only loaded in the camera for a short
time before being removed. Before taking important pictures, check that the
date and time settings are correct.
• If the date and time setting is canceled, a warning is displayed on the monitor
the next time the camera is turned on. g"Error codes" (P.156)
7
Measurement units (m/ft)
The measurement unit can be selected from either meters or feet in the
manual focus mode.
m At long ranges, the camera measures in meters, and at short ranges in
centimeters.
ft At long ranges, the camera measures in feet, and at short ranges in inches.
Mode dial
Top menu
116
[MODE MENU] [SETUP]
2004 . 01
00
SELECT
[m/ft] [m] / [ft]
g"Menus" (P.17)
.
01
:
00
SET GO
OK