Saeco GranBaristo HD8964 User Manual page 93

Machine actions
Coff ee is not brewed, is
brewed slowly or only a few
drops are brewed (see note).
Coff ee leaks out of the
dispensing spout.
The dispenser cannot be
installed on the milk carafe.
Causes
The ground coff ee is too fi ne.
Circuits clogged.
The circuit is not primed.
The dispensing spout is dirty.
The brew group is dirty.
The dispensing spout is clogged or
not correctly inserted.
The pin is in the wrong position.
Note:
These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case, wait until
the machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
ENGLISH
Solutions
Change coff ee blend or adjust grinding as
explained in the "Adjusting the Ceramic
Coff ee Grinder" chapter.
Perform a descaling cycle.
Prime the circuit (see the "Using the Ma-
chine for the First Time" chapter).
Clean the dispensing spout and its holes.
Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
Clean the dispensing spout and its holes
and insert it back correctly.
Manually push the pin to the correct
position and insert the carafe dis-
penser.
91 91