4.3 HDD
2.
Slide the HDD pack horizontally to disconnect it from HDD connector.
3.
Lift up and remove the HDD pack from HDD bay as shown in Figure 4.3.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
4.
Place the HDD pack on a flat surface such as a desk.
NB250/NB255 Maintenance Manual
Downloaded from LpManual.com Manuals
Figure 4.3 Removing the HDD from the HDD bay
4 Replacement Procedures
4-11