Error! Style not defined. Error! Style not defined.
2. Pull the tab right to remove the HDD module.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
3. Place the HDD pack on a flat surface such as a desk.
4. To separate the plate from the HDD, remove four M2.5x3 screws with torque value
3.5kgf.
M2.5x3*4
Satellite A500D Maintenance Manual
Figure 4.3 Removing the HDD from the HDD bay
Figure 4.4 Removing the HDD plate
4 Replacement Procedures
4-11