Figure 4.3 Releasing The Hdd From The Connector; Figure 4.4 Removing The Hdd From The Hdd Bay - Toshiba Satellite SERIES Maintenance Manual

2. Use your fingers to push the HDD in the direction indicated by the arrows in Figure 4.3.
3. Pull the tab and remove the HDD as shown in Figure 4.4.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
4. Place the HDD pack on a flat surface such as a desk.
Satellite A660/ProA660 Series Maintenance Manual
Downloaded from www.Manualslib.com

Figure 4.3 Releasing the HDD from the connector

Figure 4.4 Removing the HDD from the HDD bay

manuals search engine
4 Replacement Procedures
4-12