2 Troubleshooting Procedures
25
2.6
The wireless LAN antenna wire, wireless LAN unit or system board may each be the source
of a wireless LAN fault. Any of these components may be damaged. To determine if the
NB200 Series Maintenance Manual
Downloaded from LpManual.com Manuals
Wireless LAN Troubleshooting
START
Perform diagnostic test
(Procedure 1)
Was a wireless LAN problem delected?
Yes
Perform connector and replacement check
(Procedure 2)
Replace wireless LAN antenna/unit
Replace system board
END
Figure 2-8 Wireless LAN troubleshooting process
No
25
Wireless LAN system
is not faulty. Continue
troubleshooting - refer
to Figure 2.1