Installing The Power Board - Toshiba NB250 Maintenance Manual

4 Replacement Procedures

Installing the Power Board

Install the power board according to the following procedures.
1. Seat the power board in the correct position on the logic upper assembly.
2. Slide the power board to the end of the track until the latch clicks into place.
3. Place the power board cable into the connector on the motherboard.
4. Use tweezers and a finger to push down on the left and right latches of the connector.
Both latches must be pushed simultaneously to secure the power board cable.
5. Secure the power board cable with adhesive tape.
NB250/NB255 Maintenance Manual
Downloaded from LpManual.com Manuals
4.5 WLAN Card
4-22