Figure 4.11 Removing The Keyboard; Removing The Keyboard - Toshiba NB250 Maintenance Manual

4.5 WLAN Card

Removing the Keyboard

Remove the Keyboard according to the following procedures and Figure 4.11.
1. Open the laptop.
2. Unfasten the four hooks on the sides of the logic upper assembly. Lift up the keyboard
and remove the cable connecting it to the motherboard.
NOTE: Hooks fastening flat-type keyboards will be located on the logic upper assembly
rather than the keyboard itself.
3. Remove the keyboard.
NB250/NB255 Maintenance Manual
Downloaded from LpManual.com Manuals
Hooks

Figure 4.11 Removing the keyboard

4 Replacement Procedures
Hooks
4-19