Olivetti d-copia 16MF User Manual page 104

Troubleshooting
Message
Remove paper from Top
tray. Press GO
Remove paper from
Finisher.
Press START key.
Remove paper from
Finisher. Press GO
Paper capacity
exceeded. Remove
paper from Job
Separator.
Paper misfeed in
Finisher, lower Process
Tray and remove paper.
Out of Staples
Please Add Staples
or
Stapler Empty.
Add Staples.
Cannot staple this size.
or
Cannot staple this pap.
Size
System error.
Main switch off / on.
RAM disk error Press
GO
6-8
The Output Tray capacity has been exceeded during printing.
There are 250 sheets in the Output Tray.
There are 150 sheets in the Output Tray and the optional Job
Separator is installed.
There are 100 sheets in the Output Tray and the optional Finisher
is installed.
Remove the output.
• Press [Printer] and press
• Press [Enter]. Printing will resume.
• To cancel printing, select [CANCEL] and press [Enter].
There are 250 sheets in the optional Finisher during copying.
Remove the output.
There are 250 sheets in the optional Finisher during printing.
Remove the output.
• Press [Printer] and press
• Press [Enter]. Printing will resume.
• To cancel printing, select [CANCEL] and press [Enter].
There are already 100 sheets of paper stored on the optional job
separator.
Remove the output.
Paper has jammed in the optional Finisher.
Remove the output.
There are no staples left in the optional Finisher.
Add staples.
Stapling of small paper, such as 5
and B5R, is not possible.
This message displays when a malfunction or communication
error during printer processing has occurred.
• Switch off the main power (
cancel the job from the computer.
• Wait over five seconds and then switch on the main power ( | ).
The error is cleared. If necessary, resubmit the print job.
An error has occurred in writing to or reading from the RAM disk.
• Press [Printer] and press
[Enter]. The error is cleared.
Procedure
or to select [GO].
or to select [GO].
× 8 " (Statement), A5R,
1/2 1/2
). If the machine is printing,
or to select [GO] and press
Reference
page
—
—
—
—
page 6-18
page 4-8
—
—
—
BASIC OPERATION GUIDE