Olivetti d-copia 16MF User Manual page 100

Troubleshooting
Problem
Black lines appear on
copies when copying
from the optional
document processor.
Wrinkling occurs on
copies.
Black or white vertical
lines appear on copies.
White spots appear on
copies.
Copies are blurred.
(25 ppm model only)
Printing cannot be
performed.
Correct characters are
not printed.
Printing is not performed
properly.
6-4
Checkpoint
Is the slit glass dirty?
Is the separation needle
dirty?
Is the electrical charge
section dirty?
Is the transfer roller
dirty?
Is the machine used at
high humidity?
Is the power plug
connected to an AC
outlet?
Is the main power switch
turned on?
Is a proper printer cable
connected securely?
Was the printer cable
connected after the
machine was turned on?
Is the machine offline?
Is the Ready indicator
off?
Is a proper printer cable
connected?
Is the setting on the
computer correct?
Procedure
Clean the slit glass.
It is also possible to use the black line
correction function to make any black
lines on the copies less apparent.
Clean the separation needle.
Open the front cover and use the
charger cleaner rod to clean the
electrical charge section.
Clean the transfer roller with the
cleaning brush.
Perform drum refresh.
Connect the plug to an AC outlet.
Switch on the main power ( | ).
Connect the printer cable securely.
After connecting the printer cable,
switch on the main power ( | ).
• Press [Printer] to display the Printer
Basic screen.
• Press or to select [GO] and
press [Enter].
The Ready indicator displays.
Connect a shielded type printer cable.
Check the setting of the printer driver or
the application software.
Reference
page
page 5-2
Chapter 3,
Advanced
Operation
Guide
page 5-3
page 5-7
page 5-4
Chapter 3,
Advanced
Operation
Guide
page 2-10
page 2-12
page 2-10
page 2-12
—
page 2-10
—
BASIC OPERATION GUIDE