Custom Setup; About Custom Setup; Description Of Custom Setup Items - Furuno 1835 Operator's Manual

1. DESCRIPTION OF OPERATION
1.28

Custom Setup

1.28.1

About custom setup

When your navigating environment or task changes, you must adjust the radar. In-
stead of changing radar settings case by case, you can assign the CUSTOM key to
provide best settings for common conditions.
There are three default custom setups for the internal computer of the radar (see the
table on the next page). You can adjust these settings on the [Custom 1], [Custom 2]
and [Custom 3] menus to meet your navigation needs.
To activate a custom setup, press the CUSTOM key. The CUSTOM key switches be-
tween Custom 1, Custom 2 or Custom 3 each time you press the key. (Custom setup
numbers which are turned off are ignored.) The selected custom setup name is shown
at the upper-left corner. To escape from custom setup, operate any control.
1.28.2

Description of custom setup items

Menu item
[Custom1(2 or 3)]
[Copy]
[Gain Mode]
[Manual Gain]
[Sea Mode]
[Auto Sea]
[Manual Sea]
[Rain Mode]
[Auto Rain]
[Manual Rain]
[A/C Auto]
1-36
Description of custom setup items
Available settings
Turn on/off each custom program.
Copy settings from the [Echo] menu. The message "Com-
plete" appears after the copying is completed.
[Auto]: Automatic gain adjustment according to noise level
[Manual]: Manual gain adjustment
Copy the current position of the GAIN knob when you do [Co-
py]. This item is for read-only.
[Auto]: Automatic sea clutter adjustment according to sea
state
[Manual]: Manual sea clutter adjustment
[Coastal]: Suppress both land and sea clutter.
[Advanced]: Automatically discriminate land echoes from
sea reflections to suppress only sea reflections.
Copy the current position of the A/C SEA knob when you do
[Copy]. This item is for read-only.
[Auto]: Automatic rain clutter adjustment according to rain
cloud
[Manual]: Manual rain clutter adjustment
[Calm]: For light rain
[Moderate]: When you can not reduce the rain clutter with
[Calm] mode
[Rough]: For heavy rain
Copy the current position of the A/C RAIN knob when you do
[Copy]. This item is for read-only.
[Off], [On]
See section
1.9
1.10
1.10
1.11
1.11
1.12