Oki OkiLAN 6120i User Manual page 93

Section 3 - Chapter 4 - Using the OkiLAN 6120i in NDPS
9. Enter the printer's IP address as shown on the OkiLAN 6120i
Configuration Sheet and click Finish.
10.If the "Waiting for Printer Agent to Load" screen stays on for
more than 60 seconds, click "Stop Waiting."
11.Ignore the error message, "The Printer Agent Just Created
Needs Attention."
12.The Select Printer Driver screen appears. Choose your operating
system and select your printer model.
13.Click Continue. A screen displaying the drivers that you have
selected appears.
14.Click OK. The NDPS Printer Control screen appears.
III - 44 OKI OkiLAN 6120i User's Guide