Oki OkiLAN 6120i User Manual page 171

Section 4 - Appendix B - Application Considerations
Prerequisites
Before you proceed, the following prerequisites must
be met:
1. The name OKIPRINTER and the IP address
assigned to the OkiLAN 6120i are in the
"/etc/hosts" file on the Solaris system.
2. Make sure the LPD daemon is running on the Solaris
system.
Procedure
To configure the Solaris machine so users can spool
print jobs to the pcl print queue on the OkiLAN 6120i
named OKIPRINTER, do the following:
1. Login to the Solaris machine as root.
2. Type: lpsystem -t bsd OKIPRINTER.
3. Type: lpadmin -p lj4 -s
OKIPRINTER!yourqueuename - I any.
4. Type: accept lj4.
5. Type: enable lj4.
6. Try printing by issuing the following command:
IV - 78
lp -d lj4 filename
OKI OkiLAN 6120i User's Guide