Running Okinet For Netware; Configuring The Okilan 6120I Using Okinet For Netware - Oki OkiLAN 6120i User Manual

Running OkiNet for NetWare

To run the utility, double-click on the OkiNet icon. The
main OkiNet for NetWare screen will display.
By default, the All Print Servers view is selected and all
print servers attached to the network from which the
OkiNet utility is running are listed.
Configuring the OkiLAN 6120i Using
OkiNet for NetWare
The following steps outline how to configure an
OkiLAN 6120i.
1. Select the OkiLAN 6120i you wish to configure.
2. Select Configuration from the Print Server menu or
select the Configuration icon on the toolbar.
3. Set the appropriate configuration by choosing the
applicable file folder tabs.
The following settings are configurable based on the
capabilities of the OkiLAN 6120i:
• NetWare
• NetWare Queues
• NetWare Port
• TCP/IP
• Protocols
* May apply to other OkiLAN print server models.
OKI OkiLAN 6120i User's Guide
Section 3 - Chapter 2 - OkiNet for NetWare
• Output Port
• SNMP
• VINES *
• EtherTalk
• SNMP Traps
III - 7