Oki OkiLAN 6120i User Manual page 182

Section 5 - Chapter 2 - Installation
3. Select OK. The Print Server Status Screen will
display. From the Configure menu, select Add Local
Port.
4. Select a print server and port.
Print servers are identified by serial number. (You
will find the serial number for your OkiLAN 6120i
on the enclosure.) The port is indicated by P1, P2,
P3, or P4. Use the arrow buttons to scroll through
the available print servers on the network.
5. Enter a local port name. Highlight the entry field
labeled Local Port Name, and enter a name that will
help you identify the local printer port.
The name must begin with "\PIPE\", which is
provided by default. It can be up to eight characters
long (excluding "\PIPE\") and must follow OS/2 file
naming conventions.
6. Select Add. Selecting Cancel exits without adding a
local printer port.
7. Repeat these steps for all print server ports you are
configuring.
8. Exit OkiNet for OS/2.
V - 8 OKI OkiLAN 6120i User's Guide