Oki OkiLAN 6120i User Manual page 137

Section 4 - Chapter 6 - Telnet Configuration
*****************************************
OkiLAN 6120i Configuration Utility
1. Show Network/Printer Information
2. Change Password
3. Specify Print Server IP Address
4. Specify Subnet Mask For Your Network
5. Identify Default Gateway IP Address
6. Configure Port
7. TCP Connection Configuration
8. Download New Firmware
9. Restore to Factory Defaults
To select an option above, type its number and press
Enter.
To quit, press Enter.
*****************************************
Showing Network/Printer Information (Option 1)
This option displays current network and printer
information.
Changing the Password (Option 2)
This option allows you to change the password required
for access to this utility. We recommend that you
change your password periodically, especially if
security may have been compromised. Type a password
(5-24 characters long). The characters you type will not
appear on the screen. When you are done typing, press
Enter. You will be asked to enter your password again.
This allows you to verify your password was typed
correctly.
You must save your changes when you exit the utility
for the new password to take effect.
IV - 44 OKI OkiLAN 6120i User's Guide