Oki OkiLAN 6120i User Manual page 140

Section 4 - Chapter 6 - Telnet Configuration
Configure Printer Type
This option enables you to indicate the printer type to
which the OkiLAN 6120i is connected. Printer choices
are:
1. Oki Data printer.
2. Custom printer.
• Language Switching Sequence - If you select
Custom Printer from the Configure Printer Type
screen, you must indicate the switching sequence to
be used for both PCL and PostScript. This is only
necessary if language switching is set to something
other than OFF.
TCP Connection Configuration (Option 7)
TCP Connection Timeout
This is used to sever network TCP/IP Connections that
are idle for more than a specified period of time
(between 1 and 3600 seconds). You can also disable
timeout checking. Under most conditions you will want
to leave this function enabled.
Raw Port Number
Set the port number where the raw port connections
will be accepted.
Download New Firmware (Option 8)
This option is provided for future product
modifications and enhancements. It requires an update
file from OKI.
CAUTION: Do NOT use this option without having
the upgrade files on hand. The OkiLAN 6120i will be
locked in download mode. This is indicated by a
flashing orange-green Status LED.
The latest firmware and utilities are available through:
• World Wide Web: http://www.okidata.com
Firmware update instructions are available with the
download file.
OKI OkiLAN 6120i User's Guide IV - 47