Message Confirmation Report Options; Mcf (Single-Loc); Mcf (Multi-Loc); Image In Mcf - Oki OKIFAX 5780 User Manual

Message Confirmation Report Options

Message Confirmation Report (MCF) is a very convenient
feature that is often used on a daily basis to ensure that faxes
were sent or arrived at the proper destinations. Use the
following functions to set MCF parameters.

MCF (Single-Loc)

Speed Access no. 70
Set to ON, an MCF automatically prints for single location
transmissions.
Set to OFF, no report prints.
The default setting is OFF.

MCF (Multi-Loc)

Speed Access no. 71
Set to ON, single and multiple location transmission MCFs
automatically print.
Set to OFF, no report prints.
The default setting is ON.
|
198 OKIFAX 5780/5980

Image in MCF

Speed Access no. 72
Set to ON, the entire first page of the fax transmitted prints in
the MCF.
Set to OFF, no image prints in the report.
The default setting is ON.

Err. Report (MCF)

Speed Access no. 73
Set to ON, an error report automatically prints if a fax
communication is not successful.
Set to OFF, the report does not automatically print.
The default setting is ON.
!
The Service Code 0000 on an MCF Report means that
the fax communication was successful.