Delayed Batch Transmission; Program The Delayed Batch Destination Number - Oki OKIFAX 5780 User Manual

Delayed Batch Transmission

In a delayed batch transmission, all faxes to a single location
are held until a specified time. The specified time is a daily
event (the faxes are sent at the same time every day).
Imagine that your fax machine is located in the main office,
and you send faxes to your sales force. Your machine can be
programmed to hold all documents being sent to a fax
number (salesperson) until a time you specify. When it is the
specified time, all held documents are sent to the number.
Locations must be programmed into Speed Dial (One-Touch)
numbers 31-40.
To perform a delayed batch transmission, you must
program the delayed batch destination number (One-
Touch numbers 31-40).
set the batch TX time function
send a fax as part of a delayed batch transmission
|
132 OKIFAX 5780/5980

Program the Delayed Batch Destination Number

The destination number of the location receiving the
Delayed Batch Transmission (where you are sending to) must
be assigned to a One-Touch Speed Dial.
You must use one of the One-Touch Keys 31 through 40.
Refer to "Programming Speed Dial Numbers."