Oki OKIFAX 5400 User Manual page 44

3. Enter the main fax number as follows:
To Do This
Enter numbers
Enter spaces
Enter hyphens (i.e. to wait for dial
tone)
Enter pauses (i.e., to wait for outside
lines)
Add a switch from pulse to tone
dialling for part of the call
Move the cursor to make corrections YES and NO keys.
4. Press the Start key.
5. Enter the Location ID. This is a descriptive title up to 15 characters
long. Refer to the instructions below.
To Do This
Enter numbers
Enter spaces
Enter hyphens
Enter alphabet characters
Enter a unique character.
Enter next character
Move the cursor to make corrections YES and NO keys.
6. Press the Start key. The display shows NO=<OR LOCATION>.
7. Enter the alternate fax number. Refer to the instructions following
Step 3.
8. Press the Start key to finish programming the One Touch key. The
display shows LOCATION PROGRAMMING.
9. To continue programming One Touch keys, go back to Step 2. If
you are finished programming, press the Select Function key.
10. Lift off the plastic cover above the One Touch label. Using a pencil,
write in the name for your newly-programmed One Touch key.
Replace the cover.
36
Numeric keypad
Space One Touch key
Hyphen key
Pause key
*/Tone key
Numeric keypad
Space One Touch key
Hyphen key
Locate the character you want on the numeric keypad.
Press that key repeatedly until the character appears.
Press the 0/Unique key repeatedly until the character
you want appears. The following characters are
available: ! # & ' ( ) * + , - . / : ; = ? _ ä ¤ ñ ö ü Æ Å Ø
æ å ø.
Press the NO key to move the cursor to the next
position for the next character.
Use
Use
User's Guide