Table of Contents
Advertisement
6.
Press Register/Edit.
7.
Select the box number you want to register.
8.
Select a type of F code box:
- Secure Box - refer to "Registering an F Code Secure Box" on page 84.
- Bulletin Box - refer to "Registering an F Code Bulletin box" on page 85.
Registering an F Code Secure Box
1.
Press Secure Box.
(a)
Enter a sub address using the numeric keypad.
(b)
Press Enter.
NOTE
A sub address can be registered using up to 20 digits. Numbers, # and * can
be registered.
If you make a mistake when entering the digits, press the Clear button to
delete and then enter the correct digit.
2.
Register an ID Code number (4 digits) using the numeric keypad.
NOTE
The ID code is not displayed, write it down and keep it safe!
3.
Press Enter.
4.
Enter a box name:
(a)
Press Box name.
(b)
Enter a box name using the on-screen keyboard.
(c)
Press Enter.
NOTE
In using one-byte characters, up to 16 characters can be registered. In using
double-byte characters, up to 8 characters can be registered.
5.
If required, enter a password:
(a)
Press Password.
(b)
Using the numeric keypad enter a password.
(c)
Press Enter.
NOTE
• Up to 20 digits of numbers, * and # can be used for a password.
• Registering a password is optional.
• The same password can be registered in other boxes.
6.
If required, specify a retention period:
(a)
Press Hold Time.
(b)
Using the on-screen arrows or numeric keypad enter the number of days.
Operation > 84
Advertisement
Table of Contents
