Oki MC860n MFP User Manual page 165

STATUS / MESSAGE
CODE
Error Check Data
Program Data Receive Error
<%DLCODE%>
Error Wait a Moment
Program Data Writing
Error Power Off/On
Program Data Written OK
Error Check Data
Program Data Write Error
<%DLCODE%>
Error Shutdown screen
&
Initializing screen
Error Shutdown in progress
Error Please turn off the Power.
Error Lamp Error. Please call service.
Error Carriage Error
Error USB Memory Full
Press <Stop> key
MEANING / ACTION
An error has occurred while your
machine's network card firmware is
being reprogrammed.
%DLCODE%
1. File size error.
2. Check-sum error.
3. Invalid printer model number
4. Invalid module I/F version
5. Invalid FAT version
Your machine's network card firmware
is being reprogrammed.
Your machine's network card firmware
has been reprogrammed successfully.
An error has occurred while your
machine's network card firmware is
being reprogrammed.
%DLCODE%
1. Memory allocation error
2. Download file error
3. Device allocation error
4. No device space
5. File writing failure
6. CU-F/W mismatch
Controller unit is rebooting.
%CODE%:
0 ... Reboot due to a reason other than
the following.
1 ... Reboot due to PJLCommand.
2 ... Reboot in accordance with a menu
change.
3 ... Reboot due to quit operator of
PostScript Language.
4 ... reboot by Network Utility (including
Web).
Your machine is shutting down.
Shutdown complete.
Indicates that a lamp error error has
occured.
If the code still appears, contact your
dealer.
Indicates that a mirror carriage error
has occured.
If the code still appears, contact your
dealer.
Indicates that file saving has failed due
to insufficient free space in the USB
memory.
Troubleshooting > 165