Table of Contents
Advertisement
9.
Reconnect the power cable and switch the MFP on.
10.
When the MFP is ready, print a configuration report as follows:
(a)
Press Reports button (1) on the scanner control panel.
(b)
On the touch screen, touch the Configuration button (2).
(c)
At the prompt, touch Yes to print the report.
11.
Examine the first page of the configuration report.
Near the top of the page, above the horizontal line, you will see the current MFP
configuration. This list contains the figure for total memory size.
This should indicate the total memory now installed.
2
Installing Upgrades > 136
1
Advertisement
Table of Contents
