Oki MC860n MFP User Manual page 40

FEATURE OPTION
Fax Setup Other
(cont.) Settings
(cont.)
Other
Settings
(cont.)
Block Junk Fax Setting:
OFF, Mode1, Mode2,
Mode3
Register/Edit
Delete
Ring Response 00~02~10 Times
Dialing Pause 00~02~10 Second
Duration
High Resolution 400dpi, 600pdi
Rx Reduc. Rate Auto, 100%
Reduc. Margin 00~24~85 mm
Rotate Tx OFF, ON
ECM Mode OFF, ON
PreFix User defined
Received Time OFF, ON
Stamp
Print Check OFF, ON
message
Configuring Your Machine > 40
DESCRIPTION
Can prevent unnecessary fax
reception.
Mode1: Reject fax from a number
not registered in the Address
Book.
Mode2: Reject fax from a number
registered in the Reject List.
Mode3: Reject fax from a number
not registered in the Address Book
or registered in the Reject List.
Select a listing and register or edit
a number in the Reject list.
Note: enter the last four digits of
the fax number.
Note: only available if Mode2 or
Mode3 Setting selected.
Note: max. 50 entries.
Select a number from the listing
and delete.
Enter the number of rings required
before receiving an incoming fax.
Enter the pause duration required.
Select the resolution.
Select the Rx reduction rate.
Select the reduction margin.
Enable/disable fax image rotation.
Condition: only available when A4
LEF or Letter LEF selected.
Error correction mode (ECM)
automatically detects and corrects
errors in the fax transmission
process that are sometimes
caused by telephone line noise.
Enter the require dialing prefix (if
you are connected via a PBX then
you need to enter a prefix to
obtain an outside line connection).
Note: max. 40 digits.
Set to ON if you want the time
stamp printed on incoming faxes.
If enabled, when a transmission
error occurs the error content is
reported.