Oki MC860n MFP User Manual page 47

FEATURE OPTION
Print Setup Print Menu
(cont.) (cont.)
Color Menu
Printer Adjust BG Setting:
(cont.)
-3, -2, -1, 0, +1, +2,
+3
Print Position Front X Adjust:
Adjust -2.00~0~+2.00 mm
Front Y Adjust:
-2.00~0~+2.00 mm
Back X Adjust:
-2.00~0~+2.00 mm
Back Y Adjust:
-2.00~0~+2.00 mm
Drum Cleaning OFF, ON
Hex Dump OFF, ON
Density Control Manual, Auto
Adjust Density Execute
Color Tuning/ Execute
Print Pattern
Configuring Your Machine > 47
DESCRIPTION
To correct variations in print
results caused by temperature/
humidity conditions and difference
in print density/frequency.
Change the setting when
background is dark.
X adjust: Adjusts the position of
the whole printing image
perpendicular to the direction of
paper movement (i.e.
horizontally).
Y adjust: Adjusts the position of
the whole printing image parallel
to the direction of paper
movement (i.e. vertically).
Set to produce idling of a drum
before printing in order to reduce
horizontal white lines. This
shortens image drum life.
Prints out the data received from
the host PC in hexidecimal code.
If set to Auto, image density will
be automatically adjusted at
power on, when a new image
drum or toner cartridge is
installed, and at intervals of 100,
300 and 500 drum counts. If a 500
drum count interval occurs during
a print job it will occur at the end
of that job, and will take up to 55
seconds. If set to manual, this
adjustment will only be performed
when initiated by the next menu
item.
Press Yes to execute or No to
cancel.
Selecting this will perform the auto
density set up immediately.
Press Yes to execute or No to
cancel.
Selecting this item prints the color
tuning pattern to help you adjust
the color balance.