Troubleshooting; Option Board Error; Lan Data Error; Network Problem - Oki ii User Manual

Internet fax and network print/network scanner kit

Table of Contents

Troubleshooting

When OPTION BOARD ERROR is displayed on the fax machine LCD,

an error may have been caused at the interface with the network card. In

this case, turn off the fax machine, check that the network card is correctly

installed and power up again.

When LAN DATA ERROR is displayed on the fax LCD, there may be a

problem in the printing data transmitted via the network. As the printing

data will be cancelled, please conduct the printing again. If this error re-

occurs while printing documents the fault may be a paper jam. Please

clear the paper jam.

Note:

When a print job was cancelled on a PC, LAN DATA ERROR

may be displayed. This is because defective data may have been

transmitted to the fax machine.

If any other printing problems occur other than the errors mentioned in

this section, refer to the utilities manual in the CD-ROM.

Network Printing

Table of Contents