Receiving Faxes Manually; Receiving Faxes To Memory; No Paper Reception - Oki OKIFAX 5900 User Handbook Manual

2 If documents are stuck partway through the document
feeder, you may see a RELOAD DOCUMENT message on
the display. Press the Stop key again. The machine feeds
the document the rest of the way through the document
feeder.

Receiving Faxes Manually

If you machine is set to the manual receive (TEL) mode,
follow the instruction below to receive faxes. You need to
have an optional handset installed, or an external handset
connected.
1 When your telephone or fax machine rings, pick up the
handset. If a person is on the line, carry on your
conversation.
2 If a signal from a remote fax machine is heard, or if a
person wishes to fax you a document after a conversation,
press the Start key.
3 When the RECEIVING message appears on the display,
hang up the handset. The machine will emit a tone
following disconnection, telling you that the transmission
was successful.

Receiving Faxes to Memory

Your machine automatically receives messages into memory
(without immediately printing them) in a few different
situations.
When your machine is set to Memory Reception Mode
(MEM), it receives data into memory without printing and
displays MSG. IN MEMORY. To print from memory:
1 Press Menu/Exit to enter Menu.
to select Print from Memory, press Enter.
2 Press
to select Print Memory Msg., press Enter.
3 Press
!
If a memory reception password has been set, enter the
4-digit password. Press Enter.
4 Data in memory is printed.
!
If you switch to Auto Receive Mode, disabling Memory
Reception Mode , all messages stored in memory are
printed out.

No Paper Reception

If your machine runs out of paper:
A NO PAPER, REPLACE PAPER message appears on the
display.
The machine continues to receive faxes in memory.
Any messages received in memory are printed when the
paper is replaced.
|
Handbook 49