Incoming Call Parameters - Oki OKIFAX 5900 User Handbook Manual

Incoming Call Parameters

Incoming Ring
Speed access no. 60
This function offers a soft ringing sound through the
machine's built-in speaker when a call is received. If the
function is set to OFF, the machine will not emit a ringing
sound during incoming calls. If the function is set to ON, the
machine will only emit a ringing sound when the machine is
set to TEL (manual receive mode) or Ring Response is set to
20 sec (except 1 ring). When set to DRC, the machine will
emit a ringing sound for each incoming call with the same
tone even if the Distinctive Ring parameter is set to ON.
Available settings are ON, OFF and DRC.
Remote Receive
Speed access no. 61
This function allows switching from telephone to fax mode to
receive an incoming fax. Use the keypad on the optional
handset or external telephone to enter the remote receive
number programmed into the machine. Available settings
are: OFF, 00, 11, 22, 33, 44, 55, 66, 77, 88, 99, ** or ##.
|
34 Handbook
Continuous Tone
Speed Access no. 63
When this function is set to ON, a completion tone is emitted
at the end of receiving a fax. Pressing the Stop key turns off
the tone. Default setting is OFF.
PC/FAX Switch
Speed Access no. 64
When set to ON, the machine will automatically switch to
FAX when fax reception by a connected personal computer is
not possible. Fax reception is disabled with set to OFF.
Available settings are ON and OFF.