Sending Documents Requested By Another Fax Machine (Polling Transmission); Memory Polling - Oki OKIFAX 5900 User Handbook Manual

Initiating a relay broadcast:
1 Load the document(s).
2 Press Menu/Exit to enter Menu.
to select Relay Initiate TX, press Enter.
3 Press
4 Enter the password (4-digit number) of key relay station,
press Enter.
5 Enter two-digit numbers of remote stations, press Enter.
6 Enter the desired location using the Speed Dial number or
numeric keypad, press Start.
7 The machine will scan the document(s) into memory and
begin faxing to the key relay station.
8 If all memory is used, the display will show Memory
Overflow, Send Scanned Pages?
9 To send scanned pages, press Enter.
To set the relay report number:
1 Press Menu/Exit to enter the menu.
to select Location Program, press Enter.
2 Press
to select Relay Report No., press Enter.
3 Press
4 Enter the telephone number of the desired location using
the numeric keypad (40 characters max.), press Enter.
5 Press Menu/Exit to return to standby mode.
Sending Documents Requested by Another
Fax Machine (Polling Transmission)
Sometimes it is useful to simply load your documents into
your fax machine and set it to wait for the receiving fax
machine to call and collect them. This is called setting your
fax machine to be polled, or polling transmission. Your
machine holds data in memory until transmission occurs.

Memory Polling

This feature enables remote machines to contact this machine
and poll data directly from memory.
To set memory polling:
1 Press Menu/Exit to enter the menu.
2 Press to select Polling TX/RX.
3 Press Enter to select Polling TX.
to select Memory Poll, press Enter.
4 Press
5 Load the document(s).
6 Document(s) are scanned and stored in memory, and
display shows Waiting to be Polled.
|
Handbook 61