Cleaning The Printer - Epson Stylus Pro 4000 Printer Manual

Caution: Be careful not
to spill ink from the
maintenance tank when
removing it. Hold it upright
at all times and dispose of
it carefully.
Caution: Be careful not
to touch the gears inside
the printer.
To avoid damaging the
components as well as
the case, never use
alcohol or thinners to
clean the printer.
Be careful not to get
water on the printer
mechanism or electronic
components.
Don't use a hard or
abrasive brush.
Don't spray the inside
of the printer with
lubricants; unsuitable
oils can damage the
mechanism. Contact your
dealer or a qualified
servicer if you think the
printer needs lubrication.
Maintaining and Transporting the Printer
3. Place your hand under the right ink compartment and gently pull out
the maintenance tank.
4. Place the used tank in the plastic bag included with the new tank.
5. Insert the new tank.
6. If you removed any ink cartridges, replace them after inserting the new
maintenance tank.

Cleaning the Printer

To keep your printer working at its best, you should clean it several times a
year.
1. Make sure the printer is turned off and all its lights are off. Then unplug
the power cord and disconnect the printer from your system.
4-89
| 89