Epson Stylus Pro 4000 Printer Manual page 113

Message Light
INK LOW B Ink light
flashing
INK OUT B Ink light on
INVALID INK B Ink light on
CARTRIDGE
LOAD PAPER
on
LOAD ROLL
PAPER on
LOAD SHEET
PAPER IN P.
TRAY
LOWER INK —
LEVERS
LOWER L (or R)
INK LEVER
MNT REQ. —
MNT TNK NEAR —
FULL
MNT TNK FULL B Ink light on
NO BORDERLESS —
WITH THIS SIZE
NO MNT TNK —
NOT STRAIGHT
RELOAD on
Explanation
Ink cartridge(s) are
nearly empty (printing
continues).
Ink cartridge(s) are
empty (printing stops).
You tried to install the
wrong ink cartridge.
Paper light Paper lever is in the
released position while
loading paper.
Paper light Paper source setting in
printer software is
different from control
panel.
One or both ink levers
are raised.
A printer part will need
to be replaced soon.
The maintenance tank
is almost full.
The maintenance tank
is full.
Borderless setting
selected for A2-size
sheets (11.7 × 16.5)
The maintenance tank
is not installed.
Paper light Cut sheet paper is not
loaded straight.
Response
Make sure you have replacement cartridges
available. See page 79.
Replace the ink cartridge(s) indicated on the
LCD panel. See page 79 for instructions.
If you are installing ink cartridges for the first
time, you must install the cartridges that came
with your printer.
If you are replacing ink cartridges, check the
package and product code. You must use the
ink cartridges designed for your printer. Other
cartridges will not work.
After you finish loading paper, pull the paper
lever all the way forward, to the secured
position.
Make sure the right paper is loaded and the
paper source setting is the same on the control
panel and printer software.
Pull the lever or levers down to lock the ink
cartridges.
Note the code number and contact EPSON as
described on page 11.
Make sure you have a replacement
maintenance tank. See page 88.
Replace the maintenance tank. See page 88 for
instructions.
Change the setting in the printer driver, or load
different-size paper.
Make sure the maintenance tank is fully
inserted. See page 88 for instructions.
Load the paper correctly.
5-113
Solving Problems | 113