The Blind Spot Monitor Function - Lexus 2016 GS350 Owner's Manual

The Blind Spot Monitor function

The Blind Spot Monitor function uses radar sensors to detect vehicles that are
traveling in an adjacent lane in the area that is not reflected in the outside rear
view mirror (the blind spot), and advises the driver of the vehicle' s existence via
the outside rear view mirror indicator.
The Blind Spot Monitor function detection areas
The areas that vehicles can be detected in are outlined below.
The range of the detection area
extends to:
Approximately 11.5 ft. (3.5 m) from
1
the side of the vehicle
The first 1.6 ft. (0.5 m) from the side of
the vehicle is not in the detection area
Approximately 9.8 ft. (3 m) from the
2
rear bumper
Approximately 3.3 ft. (1 m) forward
3
of the rear bumper
WARNING
Cautions regarding the use of the system
■
The driver is solely responsible for safe driving. Always drive safely, taking care to
observe your surroundings.
The Blind Spot Monitor function is a supplementary function which alerts the driver
that a vehicle is present in the blind spot. Do not overly rely on the Blind Spot Monitor
function. The function cannot judge if it is safe to change lanes, therefore over reliance
could cause an accident resulting in death or serious injury.
According to conditions, the system may not function correctly. Therefore the driver' s
own visual confirmation of safety is necessary.
GS350_200t_GS F_OM_OM30E86U_(U)
4-5. Using the driving support systems
301
4