Table of Contents
Advertisement
◆
Initializing the tire pressure warning system
The tire pressure warning system must be initialized in the following circum-
■
stances:
When rotating the tires.
●
When the tire inflation pressure is changed such as when changing travel-
●
ing speed or load weight.
When the tire pressure warning system is initialized, the current tire inflation
pressure is set as the benchmark pressure.
How to initialize the tire pressure warning system
■
Park the vehicle in a safe place and turn the engine switch off.
1
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation pressure
2
level. (P. 550)
Make sure to adjust the tire pressure to the specified cold tire inflation pressure
level. The tire pressure warning system will operate based on this pressure level.
Turn the engine switch to IGNITION ON mode.
3
Press
4
Press
5
Then press
Press
6
control switch and select "TPMS".
Then press and hold
message is displayed.
The message will be displayed on the
multi-information display and the tire
pressure warning light will blink
slowly 3 times.
When the message disappears, ini-
tialization is complete.
GS350_200t_GS F_OM_OM30E86U_(U)
or
on the meter control switch and select
or
on the meter control switch and select "Vehicle Settings".
.
or
on the meter
until a
6-3. Do-it-yourself maintenance
415
.
6
Hide quick links:
Advertisement
Table of Contents
