Lexus 2016 GS350 Owner's Manual page 544

544
8-1. Specifications
GS200t

Oil capacity
(Drain and refill — reference
With filter
Without filter
*
: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up the engine and turn off the engine, wait more than 5 minutes, and check
the oil level on the dipstick.
Engine oil selection
■
"Toyota Genuine Motor Oil SAE 0W-20 for Direct Injection Turbo Gasoline
Engines" is used in your Lexus vehicle. Use Lexus approved "Toyota Genuine
Motor Oil SAE 0W-20 for Direct Injection Turbo Gasoline Engines" or
equivalent to satisfy the following grade and viscosity.
Oil grade: "Toyota Genuine Motor Oil SAE 0W-20 for Direct Injection Turbo
Gasoline Engines" or ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good start-
ing in cold weather.
If SAE 0W-20 is not available, SAE
5W-20 oil may be used. However, it
must be replaced with SAE 0W-20
at the next oil change.
GS350_200t_GS F_OM_OM30E86U_(U)
*
)
4. 9 qt. (4.6 L, 4.0 Imp.qt.)
4.5 qt. (4.3 L, 3.8 Imp.qt.)
Outside temperature