126
2. Instrument cluster
Head-up display
■
The head-up display may seem dark and hard to see when viewed through sunglasses,
●
especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
When the head-up display is turned off, it will remain off even if the engine switch is
●
turned to IGNITION ON mode after the engine switch has been turned off.
The startup image will be displayed on the head-up display after the engine switch has
●
been turned to IGNITION ON mode while the head-up display switch is set to on.
Head-up rev indicator
■
The head-up display is linked to the rev indicator in the meter.
●
Whether or not to display the rev indicator in the head-up display, as well as display tim-
●
ing, can be changed through the settings for the rev indicator in the meter. (P. 117)
When the battery is disconnected
■
The customize settings of the head-up display will be reset.
Head-up display automatic position adjustment
■
If the display position is recorded into memory, the head-up display will be automatically
adjusted to the desired position. (P. 160)
WARNING
Before using the head-up display
■
Check that the position and brightness of the head-up display image does not interfere
with safe driving. Incorrect adjustment of the image' s position or brightness may
obstruct the driver' s view and lead to an accident, resulting in death or serious injury.
NOTICE
To prevent damage to components
■
Do not place any drinks near the head-up dis-
●
play projector. If the projector gets wet, elec-
trical malfunctions may result.
Do not place anything on or put stickers onto
●
the head-up display projector.
Doing so could interrupt head-up display
indications.
Do not touch the inside of the head-up display projector or thrust sharp edges or the
●
like into the projector.
Doing so could cause mechanical malfunctions.
GS350_200t_GS F_OM_OM30E86U_(U)