Auto-Off (Standby); Cup Warmer; Energy Saving; Coffee Temperature - DeLonghi ECAM65X.55 Instructions For Use Manual

1. Press the selection arrow (B2) corresponding to the "
" symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "AUTO-START
" appears on the display;
3.
Press the selection arrow corresponding to "AUTO-START
". Disable (or enable) the function by pressing the
selection arrow corresponding to
4.
Press the selection arrow corresponding to "SET TIME
". The time setting panel appears on the display (B1);
5. Adjust the time by pressing the selection arrows corre-
sponding to (increase) or
hours (H) and minutes (MIN);
6. To confirm, press the selection arrow corresponding to "OK
";
7. Press the selection arrow corresponding to "
to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.

8.7 Auto-off (standby)

Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "AUTO-OFF
appears on the display;
3. Press the selection arrow corresponding to "AUTO-OFF
4. Select the required time interval by pressing the selection
arrows corresponding to
crease) the values;
5. To confirm, press the selection arrow corresponding to "OK
";
6. Press the selection arrow corresponding to "
back to the homepage.
Auto-off is now programmed.

8.8 Cup warmer

To warm the cups before making coffee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "CUP WARMER" ap-
pears on the display;
3. Press the selection arrow corresponding to "CUP WARMER"
to disable ( ) or enable (
(or );
decrease) for the
ESC" twice
"
"
";
(increase) or (de-
ESC" to go
"
) the function.
12
4. Press the selection arrow corresponding to "
back to the homepage.

8.9 Energy saving

Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "ENERGY SAVING"
appears on the display;
3. Press the selection arrow corresponding to "ENERGY SAVING"
to disable ( ) or enable (
4. Press the selection arrow corresponding to "
back to the homepage.

8.10 Coffee temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until " COFFEE TEMPER-
ATURE" appears on the display;
3. Press the selection arrow corresponding to " COFFEE TEM-
PERATURE". The selectable values appear on the display (B1)
(the current value is underlined);
4. Press the selection arrow corresponding to the value you want
to set (LOW, MEDIUM, HIGH, MAX);
5. Press the selection arrow corresponding to "
to go back to the homepage.
Please note!
A different temperature can be set for each profile (see section
"14. Memorising your personal profile").

8.11 Water hardness

For instructions on setting water hardness, see section "17. Set-
ting water hardness".

8.12 Selecting the language

To modify the language of the display (B1), proceed as follows:
1. Press the selection arrow (B2) corresponding to the "
symbol (B8) to enter the menu;
2. Scroll through the menu items by pressing the selection
arrow corresponding to "NEXT>" until "SET LANGUAGE
appears on the display;
ESC" to go
"
) the function.
ESC" to go
"
ESC" twice
"
"