Getting Your Documents Ready To Scan - Kodak i5000 Series User Manual

Getting your
documents ready to
scan
A-61670 August 2014
• Standard paper-size documents feed easily through the scanner. When
organizing your documents for scanning, stack the documents so the lead
edges are aligned and centered in the input elevator. This allows the feeder
to introduce documents into the scanner one at a time.
• Remove all staples and paper clips before scanning. Staples and paper clips
on documents may damage the scanner and documents.
• All inks and correction fluids on the paper must be dry before scanning is
started.
• Torn, damaged or crushed pages can be transported successfully through
the scanner. However, no scanner can transport every possible type of
damaged paper. If in doubt about whether a specific damaged document
can be transported through the scanner, place the document in a clear
protective sleeve. Sleeves should be manually fed, one at a time, folded
edge first, using the gap release toggle switch.
• Some very thick and/or stiff documents; such as shipping envelopes, may
require the following:
- Use of the gap release toggle switch.
- Removal of the pre-separation pad.
- Use of the Fragile, Thick, Thin settings for Document Handling, which
will reduce transport speed.
3-7