If A Fuse Blows - Honda 2006 RC51 Owner's Manual

All of the electrical circuits on your
motorcycle have fuses to protect them
from damage caused by excess current
flow (short circuit or overload).
If something electrical on your motorcycle
stops working, the first thing you should
check for is a blown fuse.
Determine from the chart on the circuit
fuse box cover which fuse or fuses control
that component. Check those fuses first,
but check all the fuses before looking
elsewhere for another possible cause of
the problem. Replace any blown fuses and
check component operation.
Main fuse A (and spare) are located on
the starter motor magnetic switch ( )
behind the rear cowl.
Main fuse B is located under the front
seat.
The circuit fuse boxes (including spare
fuses) are located behind the left lower
fairing.
Recommended Fuses
main fuse A
main fuse B
other fuses
1. To prevent an accidental short circuit,
turn the ignition switch OFF before
checking or replacing the fuses.
2. Remove the front seat (page
the rear cowl (page
Taking Care of the Unexpected
www.ClassicCycles.org

If a Fuse Blows

3
30A
30A
20A , 10A
78 ) and
81 ). (cont'd)
187