Table of Contents
Advertisement
All of the electrical circuits on your
motorcycle have fuses to protect them
from damage caused by excess current
flow (short circuit or overload).
If something electrical on your motorcycle
stops working, the first thing you should
check for is a blown fuse.
Determine from the chart on the circuit
fuse box cover which fuse or fuses control
that component. Check those fuses first,
but check all the fuses before looking
elsewhere for another possible cause of
the problem. Replace any blown fuses and
check component operation.
If a Fuse Blows
The circuit fuse box (including spare
fuses) is located under the seat.
Main fuse A (and spare) and main fuse
B are located in the fuse box.
Recommended Fuses
main fuse A
main fuse B
other fuses
1.
To prevent an accidental short circuit,
turn the ignition switch OFF before
checking or replacing the fuses.
2.
Remove the seat (page
3.
Remove the fuse box cover ( ).
Taking Care of the Unexpected
30A
100A
30A, 20A, 10A, 5A
86
).
1
(cont'd)
179
Advertisement
Chapters
Table of Contents
