Honda 2006 RC51 Owner's Manual page 186

8. If the clearances between each surface
of the brake disc and the brake caliper
body ( ) (not brake pads) are 9
symmetrical, follow next step.
If the clearances are not symmetrical,
loosen the left axle pinch bolts and pull
the left fork outward or push inward to
adjust the clearance. Then follow the
next step.
9. Tighten the axle pinch bolts on the right
fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
If You Have a Flat Tire
Visually check that the clearances
between each surface of the brake disc
and the brake caliper body (not brake
pads) are symmetrical.
(9)
(8) brake disc
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capability.
Taking Care of the Unexpected
www.ClassicCycles.org
(9)
(8)
(9) brake caliper body
179