Honda 2006 RC51 Owner's Manual page 130

Rear Suspension Damping
Refer to Saf ety Precautions
Rebound Damping
RIGHT SIDE
(1) damping adjuster
(2) punch mark
(3) reference punch mark
on page 62 .
(1)
(3)
(2)
www.ClassicCycles.org
To adjust to the standard position:
1. Turn the damping adjuster ( )
clockwise until it will no longer turn
(lightly seats). This is the full hard
setting.
2. Turn the adjuster counterclockwise
1
approximately turn so that the punch
mark ( ) on the adjuster aligns with the 2
reference punch mark ( ). This is the
standard position.
To Reduce Rebound Damping (SOFT):
For a light load and smooth road
conditions, turn the adjuster
counterclockwise toward SOFT (S).
To Increase Rebound Damping
(HARD):
For a firmer ride and rough road
conditions, turn the adjuster clockwise
toward HARD (H).
Servicing Your Honda
Suspension
1
3
123