Brakes
RIGHT SIDE
( Rear Brake )
(1)
(2)
(1) UPPER level mark
(2) LOWER level mark
1.
Place your motorcycle in an upright
position on a firm, level surface.
2.
Check the fluid level. It should be
between the UPPER ( ) and LOWER
( ) level marks. If the level is at or
2
below the LOWER level mark, check
the brake pads for wear (page
128
Servicing Your Honda
1
129
).
Classic Cycles Technical Resources
Worn pads should be replaced. If the
pads are not worn beyond the
recommended limit, have your brake
system inspected for leaks.
Other Inspections
Make sure there are no fluid leaks.
Check for deterioration or cracks in the
hoses and fittings.