Honda 2006 RC51 Owner's Manual page 126

Front Suspension Damping
Refer to Saf ety Precautions
Rebound Damping
FRONT
(1) damping adjuster
(2) punch mark
To adjust to the standard position:
1. Turn the rebound damping adjuster ( )
clockwise until it will no longer turn
on page 62 .
(1)
(3)
(2)
(3) reference
mark
1
www.ClassicCycles.org
(lightly seats). This is the full hard
setting.
2. Turn the adjuster counterclockwise
approximately 1 turn so that the punch
mark ( ) on the adjuster aligns with the 2
reference mark ( ). This is the standard 3
position.
3. Make sure that both fork legs are
adjusted to the same position.
To Reduce Rebound Damping (SOFT):
For a light load and smooth road
conditions, turn the adjuster
counterclockwise toward SOFT (S).
To Increase Rebound Damping
(HARD):
For a firmer ride and rough road
conditions, turn the adjuster clockwise
toward HARD (H).
Servicing Your Honda
Suspension
119