Honda 2006 RC51 Owner's Manual page 21

Gauges, Indicators & Displays
Lamp Check
The PGM-FI malfunction indicator lamp
(MIL) lights for a few seconds and then
goes off when you turn the ignition switch
ON.
The low oil pressure indicator comes on
when you turn the ignition switch ON so
you can check that it is working. The
indicator remains on until after the engine
is started.
These indicators are identified in the table
on pages 16 − 18 with the words:
Check.
When applicable, the high beam and
neutral indicators come on when you turn
the ignition switch ON and remain on until
you select the low beam or shift out of
neutral.
14
Instruments & Controls
If one of these indicators does not come
on when it should, have your Honda dealer
check for problems.
Lamp
Classic Cycles Technical Resources